Snap-on DTT Uživatelský manuál Strana 1

DTTDIGITAL TORQUE TESTER2503-F-DTT25 - 250 FT.LB.0.0OTGT TORQUE: 250FIRST PEAKFT-LBMAIN MENUSETUP STOREDATA: 25

SpecificationsDisplayLCD on swivel neckDisplay Specifications Accuracy±0.5% of indicated test value from 10% to 100% of ratedcapacityUnits of Measurem

Transducer Range and Display ResolutionsDTT built-in transducers provide industry standardfemale square drives, and a full bridge strain gagesensing e

SetupMountingVertical mounting on a wall or heavy pillar is preferred formost wrench and tool testing as shown in the illustrationbelow. Use four 1/4

Tester Setup 1. Turn the power switch ON.2. In the MAIN MENU screen, select DTT SETTINGS.3. In the SYSTEM CONFIGURATION screen, the displayreads:

TestsTesting Wrenches • To avoid damage, be sure the DTT model being usedis capable of handling the torque being applied. • Always position a torque w

4. In the SELECT TEST TYPE screen, select either: QUICK CHECK (used when verifying torque wrench readings), or AUDIT (used when testing a torque w

5c. Press the CHANGE button next to SERIAL NUM toenter a wrench Serial Number if required (Figure 8).NOTE: The WRENCH S/N screen can be changedfrom N

5d. Press the CHANGE button next to OPERATOR ID toenter an Operator Identification number if required(Figure 10).NOTE: The OPERATOR ID screen can be

5e. Press the TEST button to accept all entries anddisplay the QUICK CHECK test screen (Figure 12).NOTE: The operator can return to the TEST SETUPscr

17DTT Digital Torque Tester 6b. Press the CHANGE button next to WRENCH SIZE toenter the Full Scale torque and Units of the wrenchbeing calibrated (F

Table of ContentsImportant Safety Instructions ...DTT System Component

18DTT Digital Torque Tester 6c. The tester will prompt user to set wrench to 20% ofFull Scale (Figure 15).For example: If WRENCH MAX RANGE (Step 6b

19DTT Digital Torque Tester 6e. The tester will prompt user to set wrench to 60% ofFull Scale (Figure 17).For example: If WRENCH MAX RANGE (Step 6b

20DTT Digital Torque Tester 6g. The tester will prompt user to set wrench to 100% ofFull Scale (Figure 19).For example: If WRENCH MAX RANGE (Step 6

21DTT Digital Torque Tester 6i . At the end of the test sequence, the tester will return tothe TEST SETUP screen in order to begin a new testsequenc

Made in USA with US and Global ComponentsFor Warranty Claims, Contact CDI Torque ProductsLIMITED WARRANTYThe DTT Digital Torque Tester is backed by a

IMPORTANT SAFETY INSTRUCTIONSThis manual contains important safety and operatinginstructions for the Digital Torque Tester (DTT). Read All Instruction

General SafetyWARNINGImproper use can cause breakage.• Read instructions before operating.• Follow manufacturer’s instructions, safetyprecautions, and

• Never attempt to test an impact tool or pulse typetool on this instrument.• Mount the DTT securely to a heavy bench, wall orother support structure

4DTT Digital Torque Tester DTT System ComponentsA — DTTB — AC AdapterC — Battery PackD — USB CableAC/DC transformer, Voltage Output: 9VDC, Current 1.

IntroductionUse the portable DTT to test “click” type torque wrenches(adjustable and preset), torque screwdrivers, dial indicatingand electronic wrenc

This manual contains general information.Operating features and specifications maychange without notice. CDI Torque makes noclaims regarding the suit

C — TransducerFemale square drive.D — Battery Access Battery Pack housing panel. Remove Phillips screwto access Battery Pack. E — Power Switch Rocker